LE MAGISTER is a flavour focused atomizer for experimented users only, please note this is not a dripper for cloud chasing.
This is a fine combination of full flavour enjoyment and ease of use
Made in France
RTA Rebuildable Tank Atomizer holding approximatly 2.5ml of liquid
Stainless steel 316L
Single or dual coil
Airflow Control : ø1.2mm, ø1.5mm and ø2.2mm (2.2mm can be used to adjust hole on hole, allowing an accurate airhole size as you like to vape)
Cotton or fiber wick
We recommand to use coil jig 2mm or maximum 2.5mm (please do not try to go more than 2.5mm because there is not enough space into the chamber
Make sure when you build LE MAGISTER to keep room between coil and plate, and between coil and central post, approximatly 1mm all around.
Our favorite set-up is a single coil resistance between 0.65Ω to 0.9Ω , 4 or 5 wraps of Kanthal A1 0.28 or 0.32, airhole ø1.2mm 15.5W. / 17.5W.
Spare kit : 2x Oring ID18mm Tore1mm green Viton and 1 Oring ID5.5mm Tore1.5mm
Please note to keep the tank and the deck well screwed, there is an Oring between these two parts for sealing.
When you screw the atomizer on a mod we recommand to screw by turning the deck and not by turning the tank because there is a risk to unscrew the deck and tank. Thank you & have a good vape with Le Magister
Vaponaute cannot be held responsible for any misuse of the product, including too low resistance coils
OUT OF STOCK
This product is no longer in stock